Pittman 30mm Brush DC Motor

New Pittman® brand 30mm brush-commutated DC motors integrate high-energy bonded neodymium magnets for maximized power density and an optimized magnetic field profile and 7-slot straight armature to minimize cogging. The motors additionally feature a large diamond-turned commutator and copper-graphite brushes to deliver high current capacity and long-life... [Read more]

CAN in Automation 402-CANopen Profiles Extended to OEM Drives

Covina, Ca. – QuickSilver Controls, Inc. has added CANopen® DSP 402 (CiA® DSP 402 v3.0) to its OEM line of controllers/drivers for NEMA 11, 17 and 23 frame brushless servo motors, further extending the capabilities by adding encoder following and hard-stop homing capabilities as a manufacturer extension to the specification. This adds the QCI-D2-MG-C... [Read more]

HEIDENHAIN’s 1000 Series Rotary Encoders

SCHAUMBURG, IL - Opening up the market for innovations in the automation, medicine and electronics equipment industries, HEIDENHAIN Corporation presents a new generation of rotary encoders with IP 64 protection, absolute position-value formation and functional safety, all within a 35 mm diameter housing size. These small rotary encoders are known as... [Read more]

Right Angle EG Planetary Gearheads from Sterling Instrument

New Hyde Park, NY — A new series of right angle EG planetary gear heads from Sterling Instrument (ISO 9001:2000+AS9100B Registered Manufacturer) features low cost, and is offered in four standard NEMA sizes, 17, 23, 34, and 42. These gearheads, identified as the S91..SREG.. Series, feature the planetary system, high torsional stiffness, case-hardened... [Read more]

ControlLogix Interface Communicates with EnDat Sensors

Terryville, CT – A direct interface to EnDat position encoders is now available for the 1756 ControlLogix PLC. The AMCI 7272 module is a digital, bidirectional interface for EnDat encoders, with features including latch inputs, onboard diagnostics, and read/write access. Utilizing Rockwell Automation licensed technology, the 7272 EnDat Interface... [Read more]

New Trio Motion Product Catalog

Trio announces the release of a new product catalog for 2010 with more comprehensive hardware and software information. A new product selection guide makes it easy to compare and choose controllers.The catalog encompasses Trio’s full line of Motion Coordinators including the new MC464, and ancillary components such as the new IO modules. Highlights... [Read more]

Rino RW8 Miniature NEMA 23 Flanged Gearbox

The made in USA miniature Rino RW8 gearbox with NEMA 23 input flange has ratios from 1:1 to 120:1 and torques to 40 inch-lbs. Input speeds to 5000 rpm. The RW8-NEMA23 is easily customized to meet customer’s special needs. Available from stock.The RW8-NEMA23 is made from a CNC machined aluminum block housing, dual ball bearings for shaft support,... [Read more]

Lin Engineering NEMA 23 Brushless DC Motors

Santa Clara, CA — Lin Engineering announces the release of their new line of NEMA 23 Brushless DC (BLDC) motors.  These motors are best for applications where high speed and high dynamic torque are a must for the user’s application. Lin’s NEMA 23 BLDC’s provide extremely quiet and smooth operation regardless of speed range, although the optimal... [Read more]

Sauer-Danfoss introduces H1 60cm³ Bent-Axis Motor

Nordborg, Denmark, – Sauer-Danfoss has released its new H1 60cm3 bent axis motor, the next size in a series of motors designed to complement the growing range of H1 axial piston pumps. With the introduction of the H1 bent axis motors, Sauer-Danfoss offers a complete H1 transmission system, optimized around electrical control. The H1 motors not only... [Read more]

High-Performance Hybrid Stepper Motors from AMETEK

Kent, Oh. – AMETEK Technical and Industrial Products’ new MAE® brand Size 34 (Model HS 200) hybrid stepper motors exhibit superior torque characteristics to power a wide range of industrial equipment applications. Their low detent torque to holding torque ratios deliver smooth and quiet operation and the fine positioning capability required for... [Read more]