• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertise
  • Subscribe

Motion Control Tips

Automation • Motion Control • Power Transmission

  • News
    • Industry News
    • Editor Blogs
  • Controls
    • HMIs
    • PC-Based Controllers
    • PLCs + PACs
    • Stand-Alone Controllers
    • Software
  • Drives
    • Servo Drives
    • Stepper Drives
  • Encoders
    • Absolute Encoders
    • Incremental Encoders
    • Rotary Encoders
  • Mechanical
    • Bearings
    • Brakes + Clutches
    • Belt + chain
    • Couplings
    • Gears + Gearing
    • Lubrication
    • Shock + Vibration Mitigation
    • Springs + Rings + Seals
  • Linear
    • Actuators
    • Linear Motors
    • Linear Encoders
  • Motors
    • AC Motors
    • DC Motors
    • Brushless Motors
    • Gearmotors
    • Piezo Motors
    • Servo Motors
    • Stepper Motors
  • Systems
    • Conveyors + linear transport systems
    • Gantries + Stages
    • Rotary Tables
    • Grippers + End Effectors
    • Robotics
  • Networks
    • Connections + Sliprings
    • Fieldbuses
    • I/O
    • Sensors + Vision
  • Resources
    • FAQs
      • Motion Casebook
      • Motion Selection Guides
    • Suppliers
    • Video

Mike Santora

Omron Automation Americas announces award winners

June 12, 2018 By Mike Santora Leave a Comment

Omron-robot-screen-cap

Industrial automation solutions provider Omron Automation Americas recently announced the 2017 fiscal year’s winners of the Distributor of the Year award at its FY18 Sales Conference during the week of May 21st. Over 650 persons representing Omron and its channel partners participated in the event, which included new technology presentations, product training, business planning and […]

Filed Under: Industry News Tagged With: Omron

Balluff’s emergency stop for safety over IO-Link

May 7, 2018 By Mike Santora Leave a Comment

Safety E-Stop

Balluff has added an Emergency Stop device (E-Stop) to widen further the safety product portfolio.  Balluff’s E-Stop is easily and inexpensively connected directly to the Balluff “Safety Over IO-Link” module or to any safety controller using standard M12 connectors, eliminating terminations and reducing the incidence of mis-wiring.  “These devices are used in a variety of […]

Filed Under: Industry News Tagged With: Balluff

PTDA 2018 Leadership Development Conference

May 7, 2018 By Mike Santora Leave a Comment

PTDA Foundation

Dozens of future leaders in the power transmission/motion control industry engaged in a mix of education and interactive exercises and took home powerful tips and strategies from facilitator Matt Mayberry during the PTDA 2018 Leadership Development Conference. Held March 21-23 in San Antonio, Texas, participants in “Transformational Leadership: Becoming a World Class Leader” walked through […]

Filed Under: Industry News Tagged With: PTDA (Power Transmission Distributors Association)

Beckhoff touch panels with 10.1-in. widescreen displays

March 16, 2018 By Mike Santora Leave a Comment

Beckhoff-touch-panel-widescreen

Beckhoff Automation has announced the release of the CP6x00 Control Panels and Panel PCs with 10.1-in. widescreen displays. The expanded line of entry-level panels from Beckhoff, first launched with 7-in. displays, has been expanded by three new cabinet-mounted devices, each with a 10.1-in. widescreen display. PC-based control technology in the cost-sensitive, lower to middle performance […]

Filed Under: HMIs Tagged With: Beckhoff

IDEC introduces MicroSmart FC6A Plus PLC

March 13, 2018 By Mike Santora Leave a Comment

IDEC-FC6A-Plus-PLC

IDEC Corporation announces the release of its MicroSmart FC6A Plus, a PLC with up to 2,060 local I/O. With its expanded I/O capacity, the FC6A Plus can control and monitor the largest machines or entire small-scale manufacturing facilities, a capability seldom found in a micro PLC. To ensure high-level performance with this expanded I/O count, […]

Filed Under: PLCs + PACs Tagged With: IDEC

True non-contact rotary encoder

March 2, 2018 By Mike Santora Leave a Comment

Joral-non-contact-rotary-ecoder

Joral LLC introduces the PE18 ProxEncoder non-contact rotary encoder product line. Modeled in a threaded proximity switch housing, the 18mm true non-contact encoder is designed to capture rotary motion where conventional sensors fail. Two USPTO patents enable the PE18 ProxEncoder to detect on-axis rotation with up to 0.5-in. (12mm) air gap between the application and […]

Filed Under: Rotary Encoders Tagged With: joral

Miniature voice coil motor with high force-to-size ratio

March 1, 2018 By Mike Santora Leave a Comment

moticont-voice-coil-motor-image

Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio. It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak force in a compact 0.750-in. (19.1 mm) diameter x 0.94-in. (23.8 mm) long envelope (at mid-stroke). This […]

Filed Under: Industry News Tagged With: Moticont

Dual feedback voice coil actuator from H2W Technologies

May 10, 2017 By Mike Santora Leave a Comment

H2W-Technologies-Dual-Feedback-VoiceCoil-Actuator

The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length […]

Filed Under: Gantries + Stages, Industry News Tagged With: h2wtechnologies

Ogura’s new product line addition – mechanical clutches

May 9, 2017 By Mike Santora Leave a Comment

Ogura Industrial has announced a new addition to its product line. Although this product is not new to Ogura, it is new to North America. The mechanical clutch series is finding new opportunities for machinery manufacturers in North America because of some of its unique features. The mechanical clutches are a multiple disc design that […]

Filed Under: Brakes + Clutches, Mechanical PT Tagged With: Ogura

New networked safe torque off option module

May 1, 2017 By Mike Santora Leave a Comment

Rockwell-automation-safe-torque-module-image

Rockwell Automation has introduced a networked safe torque off option module, allowing safety and nonsafety functions to share the same EtherNet/IP network. Designed for the Allen-Bradley PowerFlex 755 and PowerFlex 755T AC drives, this safety option helps protect personnel and equipment by removing rotational power from the motor without removing power from the drive. This […]

Filed Under: Industry News Tagged With: rockwellautomation

  • « Go to Previous Page
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Page 5
  • Go to Next Page »

Primary Sidebar

LEARNING CENTER

Design World Learning Center

Motion Control Handbook

“mct
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Design Engineering Professionals.

RSS Featured White Papers

  • Robotic Automation is Indispensable for the Logistics Industry’s Continued Growth and Success
  • Reliable Linear Motion For Packaging Machines
  • Polymers Outperform Metals In Precision Gearing

Footer

Motion Control Tips

DESIGN WORLD NETWORK

Design World Online
The Robot Report
Coupling Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering.
Wire and Cable Tips

MOTION CONTROL TIPS

Subscribe to our newsletter
Advertise with us
Contact us
About us

Copyright © 2026 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy | RSS