AutomationDirect has expanded their line of SureStep motion control products. Stepping motors in standard NEMA sizes (17, 23, & 34) now include bi-polar models with output torques ranging from 61 oz-in. to 1291 oz-in. The motors feature a pigtail cable with locking connector for easy hook-up and 200 steps per revolution. The stepping motors are […]
Stepper Drives
AllMotion Questions and Answers
Q. Can I daisy chain the intelligent motor control systems and run three stepper motors using one serial connection? A. Yes, you can daisy chain up to 16 devices on the same serial bus. Each has an address switch to easily set the address of the unit. You can also use firmware settable address for […]
Mechatronic Stepper Motor Drives with CANopen
Hamburg, Germany – TRINAMIC announces new members of the PANdrive™ family. The latest members of the family are the types PD-140-42-SE and PD-116-60-SE. Both feature TRINAMIC’s integrated absolute sensOstep™ encoder which detects and corrects missed stepper-motor turns by examining the absolute posi-tion. This insures correct shaft motion even under heavy motor loads. Reliable high-speed motor […]
Applied Motion Adds CANopen Option to ST Step Motor Drives
WATSONVILLE, CA – Applied Motion Products announces the addition of CANopen communications to the ST series Step Motor Drives. The addition of a CANopen option card to the range of communication options allows the drives to be controlled by a CANopen master utilizing the DS301 and DSP402 communications protocols and the CAN 2.0b Passive physical […]
