In recent years, integrated brushless servo motors from JVL have achieved a very high reputation throughout the world for their ingenious design. The existing range of 50 to 141W and 800W motors has now been supplemented with the introduction of a mid-range 400W model offering 1.3 Nm up to 3000rpm and shortly up to 1200W […]
Motors
ULT Outside Rotating Direct Drive Frameless Motors
The latest in Applimotion’s ULT family is the ULT-O Outside Rotating frameless motor kits. These motors allow the customer flexibility of a large through hole and low profile, but in this case the rotor is external to the stator. This allows the customer to integrate the rotor ring into an outside rotating hub. Similar to […]
CANopen Module for Integrated AC Servo Motors
JVL Industri Elektronik A/S, a Danish company, now represented in Ohio, USA, announces a new expansion, CANopen, module for their MAC, Integrated AC Servo motors. The CAN module offers control and setup, logic I/O for high speed start/stop, CANbus/CANopen DS 301 and CANopen DSP 402 and DeviceNet under development. The module can be delivered with […]
Bison Gear Releases Whitepaper on “Improving Gearmotor Efficiency”
St. Charles, IL – A new white paper on “Improving Gearmotor Efficiency” posted on the Bison Gear & Engineering Corp. web site addresses the relatively untapped energy savings to be had with the proper application of the billions of fractional horsepower electric motors and gearmotors in use today. Most electric motor efficiency efforts and attention […]
Parker Releases Low-Cost Connector Option
Parker’s Electromechanical Automation Division is pleased to announce release of a low-cost connector option. Historically, Parker has produced robust servo motor products for the general automation market. These motors could stand up to shock loads, environmental temperature cycles, moisture and more. All connectors and mating cables had large metal connector housings, which are meant for […]
FlexTorq(TM) 762 Hollow Shaft Offset DC Gearmotors
St. Charles, IL – Designed to fit into high torque, tight space applications, and featuring either a 1.25″ (31.75 mm) I.D. hollow shaft or a 1.25″ diameter solid shaft in the u-shaped or s-shaped configuration, Bison Gear & Engineering Corp. introduces its new FlexTorq™ 762 series hollow shaft offset DC gearmotors. Driven by 1/20, 1/4 […]
Bluetooth Module for JVL MAC Motors
JVL now introduce the first wireless integrated servo motor. Module MAC00-FB4 facilitates wireless control of the MAC motors, giving total freedom from cables. The new module makes it possible to have a direct BlueTooth connection to the motor. Via the BlueTooth link, the motor can be set up and controlled with the same possibilities offered […]
Brush DC Motors
West Chester, PA – Portescap expands its family of brush DC motors with their 35GLT motors. These RoHS-compliant motors have a 35mm housing and weigh just 360 grams, while delivering a 40% increase in torque-to-volume ratio when compared with standard iron core motors of similar frame size. The maximum continuous torque approaches 150 mNm in […]
Portescap’s h3 Stepper Motors
WEST CHESTER, PA – Portescap offers a stator-enhanced version of its h3 Series Step Motors. New h3 models feature patented enhancing magnets in the stator to provide 25+% more torque output across the entire speed range compared with original h3 models, which already deliver up to 40% more torque than traditional hybrid step motors. With […]
Arcus Drivemax Series of Integrated Stepper Solutions
The DMX-K-SA-11 is the newest and most compact member of Arcus Technology’s single axis motion control solutions. The module features a stepper motor, a microstep driver, and motor controller in one small NEMA 11 package. The product belongs to the Arcus Drivemax series of integrated stepper solutions which are especially suited for medical, manufacturing automation, […]

