St. Charles, IL – Following the successful introduction of its 100 in-lb (11.3 N-m) inverter-duty AC gearmotor line, Bison Gear & Engineering Corp. has increased by seven times the output torque capability of its Verdant Duty™ 3-phase AC offering with the introduction of the new 650 Series variable speed gearmotors. Driven by 1/4 or 1/2 […]
bison
Bison Gear launches new website
The new Bison Gear & Engineering Corp. web site offers immediate home page visibility of Bison’s extensive line of fractional horsepower AC and DC gearmotors, electric motors, gear reducers, drives and accessories. Bison Gear’s expanding video library has been added to the new site, along with white papers, featured new products and an ever-changing special […]
New Permanent Magnet DC Gearmotors from Bison Gear
St. Charles, IL – Bison Gear & Engineering introduces six standard models of new parallel shaft permanent magnet DC gearmotors with continuous torque ratings from 30 to 500 in-lbs. (3.4 to 56.5 N-m). The new VWDIR134 DC gearmotors are available with 1/10 or 1/11 horsepower (74.6 or 67.8 watts) 90 volt brushed DC electric motors. […]
Bison Gear Launches New ISIS Program
St. Charles, IL — In order to keep customers productive in uncertain times, Bison Gear & Engineering Corp. unveils its new “in-stock, instant-ship” (ISIS) program covering over 500 standard models of AC and DC fractional horsepower gearmotors, electric motors and gear reducers. The objective of Bison’s ISIS program is same-day shipment for all orders received […]
Bison Gear’s TightDrive™ Motor-Mounted Speed Control
St. Charles, IL — Bison Gear’s new TightDrive™ speed control for permanent magnet DC (PMDC) motors was designed for applications that require a convenient location for the control … on the motor. The majority of PMDC gearmotors and motors used in industry today require speed controls in order to operate. Typically, the control is wired […]
Bison Gear’s TightDrive™ Motor-Mounted Speed Control
St. Charles, IL — Bison Gear’s new TightDrive™ speed control for permanent magnet DC (PMDC) motors was designed for applications that require a convenient location for the control … on the motor. The majority of PMDC gearmotors and motors used in industry today require speed controls in order to operate. Typically, the control is wired […]
How Green is Your Gearmotor?
Three phase electric motors are more efficient than single phase, but three-phase power isn’t available everywhere. Variable Frequency Drives are today’s answer. When compared to DC speed controls, they offer more features to increase equipment life. To maximize efficiency of your gearmotor, avoid inefficient gearing. Right angle worm gear reducers can have efficiencies of 50% […]
Bison Gear Releases Whitepaper on “Improving Gearmotor Efficiency”
St. Charles, IL – A new white paper on “Improving Gearmotor Efficiency” posted on the Bison Gear & Engineering Corp. web site addresses the relatively untapped energy savings to be had with the proper application of the billions of fractional horsepower electric motors and gearmotors in use today. Most electric motor efficiency efforts and attention […]
FlexTorq(TM) 762 Hollow Shaft Offset DC Gearmotors
St. Charles, IL – Designed to fit into high torque, tight space applications, and featuring either a 1.25″ (31.75 mm) I.D. hollow shaft or a 1.25″ diameter solid shaft in the u-shaped or s-shaped configuration, Bison Gear & Engineering Corp. introduces its new FlexTorq™ 762 series hollow shaft offset DC gearmotors. Driven by 1/20, 1/4 […]
Bison Gear’s VWDIR20 Parallel Shaft AC Gearmotor
St. Charles, IL – A new parallel shaft AC gearmotor available in eight standard models is the latest addition to the expanding Von Weise Drop-In Replacement gearmotor line of Bison Gear & Engineering Corp. The new VWDIR20 AC gearmotors feature 1/4 horsepower (186 watts) 115V, 60 Hz split phase electric motors. The compact, integral gear […]
