• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Advertise
  • Subscribe

Motion Control Tips

Automation • Motion Control • Power Transmission

  • News
    • Industry News
    • Editor Blogs
  • Controls
    • HMIs
    • PC-Based Controllers
    • PLCs + PACs
    • Stand-Alone Controllers
    • Software
  • Drives
    • Servo Drives
    • Stepper Drives
  • Encoders
    • Absolute Encoders
    • Incremental Encoders
    • Rotary Encoders
  • Mechanical
    • Bearings
    • Brakes + Clutches
    • Belt + chain
    • Couplings
    • Gears + Gearing
    • Lubrication
    • Shock + Vibration Mitigation
    • Springs + Rings + Seals
  • Linear
    • Actuators
    • Linear Motors
    • Linear Encoders
  • Motors
    • AC Motors
    • DC Motors
    • Brushless Motors
    • Gearmotors
    • Piezo Motors
    • Servo Motors
    • Stepper Motors
  • Systems
    • Conveyors + linear transport systems
    • Gantries + Stages
    • Rotary Tables
    • Grippers + End Effectors
    • Robotics
  • Networks
    • Connections + Sliprings
    • Fieldbuses
    • I/O
    • Sensors + Vision
  • Resources
    • FAQs
      • Motion Casebook
      • Motion Selection Guides
    • Suppliers
    • Video

HEIDENHAIN

Heidenhain introduces new improved DRO for machinists

May 9, 2018 By Paul Heney Leave a Comment

ND 5023 Digital Readout

Heidenhain has introduced the new ND 5023 digital readout (DRO) for use with manually operated machine tools. This new DRO replaces Heidenhain’s entry-level ND 522/523 models and consolidates it to one three-axis product. The new DRO comes equipped with a new TFT color display that significantly improves the readability of the information displayed over older models, […]

Filed Under: Industrial Automation Tagged With: HEIDENHAIN

Motion Trends: Robotics, IoT impact encoder design

March 30, 2018 By Miles Budimir Leave a Comment

encoders, robots

We asked encoder manufacturers to weigh in on the trends they’re seeing in their industries. Here’s what they had to say. What new design trends are you seeing in areas such as robotics, battery powered designs, automated vehicles, and safety in motion control designs? Jonathan Dougherty Product Specialist HEIDENHAIN HEIDENHAIN rotary encoders are critical components […]

Filed Under: Encoders Tagged With: HEIDENHAIN

New SRP direct drive from HEIDENHAIN with integrated motor and sensing delivers smooth motion

December 12, 2017 By Lisa Eitel Leave a Comment

Now SRP series integrated direct drives from HEIDENHAIN integrate MRP series angle-encoder modules with ETEL torque motors having very low detent torque. These direct drives deliver smooth motion control for exacting positioning and measuring tasks.Precision rotary axes are complex, which is why integrated designs with tested and specified properties (instead of those made by machine […]

Filed Under: Featured, Integrated Motion Systems Tagged With: HEIDENHAIN

HEIDENHAIN to spotlight encoders for automation at SPS IPC Drives show

October 31, 2017 By Miles Budimir Leave a Comment

encoders

At the upcoming SPS IPC Drives show on November 28-30, HEIDENHAIN will be presenting encoders designed specifically for the requirements of the robotics, medical technology, and drive technology industries. At the show, HEIDENHAIN will present the ECI 4000 absolute inductive rotary encoder for hollow shaft diameters of 180 mm. Not only is this encoder robust […]

Filed Under: Encoders Tagged With: HEIDENHAIN

HEIDENHAIN’s magnetic spindle encoder now with functional safety

August 15, 2017 By Miles Budimir Leave a Comment

encoder

HEIDENHAIN CORPORATION has made improvements to its ERM 2200 and 2400 series of magnetic modular angle encoders with Functional Safety in mind. The ERM series has long been used by machine manufacturers around the world In keeping with the growing trend requiring “Functionally Safe” axes (an EU standard) on machines, HEIDENHAIN has improved its ERM […]

Filed Under: Encoders, Featured Tagged With: HEIDENHAIN

New angular positioning system for metrology and micromachining from HEIDENHAIN

August 1, 2017 By Miles Budimir Leave a Comment

system

The new SRP 5000 angular positioning system from HEIDENHAIN incorporates its high accuracy MRP 5000 angle encoder with accomplished bearing technology along with a unique ETEL torque motor with ultra-low detent torque. This combination allows for high stiffness with low cost of ownership and can easily replace rotary air bearing systems used for metrology. Industries […]

Filed Under: Featured, Gantries + Stages, Integrated Motion Systems Tagged With: HEIDENHAIN

Applied Motion partners with HEIDENHAIN, RENCO on new StepSERVO integrated motors

June 7, 2017 By Miles Budimir Leave a Comment

motors

HEIDENHAIN CORPORATION has partnered with Applied Motion Products, Inc. in the development of their StepSERVO™ integrated motors for high performance motion control applications. Using HEIDENHAIN’s RENCO brand RCML 15 rotary encoder inside, StepSERVO offers the next evolution in step motor technology, combining the high torque capabilities of step motors with the closed loop dynamic control […]

Filed Under: Encoders, Featured, Motors, Servo Motors, Stepper Motors Tagged With: Applied Motion Products, HEIDENHAIN

TI collaborates with HEIDENHAIN to add EnDat interface to industrial drive control system-on-chip (SoC)

May 31, 2017 By Miles Budimir Leave a Comment

control IC

HEIDENHAIN CORPORATION announced that it is working with Texas Instruments (TI) in the development of the semiconductor industry’s first microcontroller (MCU) using the HEIDENHAIN EnDat 2.2 interface as an option. TI’s C2000TM MCU industrial drive control System-on-Chip (SoC) delivers a complete solution with a direct connection for industrial motor and servo drives, supporting both analog […]

Filed Under: Controls, Drives + Supplies Tagged With: HEIDENHAIN

HEIDENHAIN’s improved grid encoder for testing CNC machines

May 2, 2017 By Miles Budimir Leave a Comment

encoder

HEIDENHAIN’s family of KGM grid encoders have been improved to better meet the needs of CNC-controlled machine users who require accuracy testing. Now the KGM 281 grid encoder is available with a measuring range of 140 mm and an increased accuracy of ±1 µm. As part of HEIDENHAIN’s KGM grid encoder series, the 281 model’s […]

Filed Under: Encoders Tagged With: HEIDENHAIN

Latest motion control advances showcased on HEIDENHAIN TV

April 25, 2017 By Miles Budimir Leave a Comment

motion control

From jet planes to laboratory equipment, today’s life-changing technologies require ultimate accuracy, and now HEIDENHAIN TV on YouTube is available to the public offering over 100 videos highlighting its latest advances in the highest of accurate precision measurement and motion control equipment. For more than 125 years, HEIDENHAIN has delivered trusted motion solutions behind the […]

Filed Under: Industry News Tagged With: HEIDENHAIN

  • « Go to Previous Page
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Page 5
  • Page 6
  • Interim pages omitted …
  • Page 9
  • Go to Next Page »

Primary Sidebar

LEARNING CENTER

Design World Learning Center

Motion Control Handbook

“mct
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for Design Engineering Professionals.

RSS Featured White Papers

  • Robotic Automation is Indispensable for the Logistics Industry’s Continued Growth and Success
  • Reliable Linear Motion For Packaging Machines
  • Polymers Outperform Metals In Precision Gearing

Footer

Motion Control Tips

DESIGN WORLD NETWORK

Design World Online
The Robot Report
Coupling Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering.
Wire and Cable Tips

MOTION CONTROL TIPS

Subscribe to our newsletter
Advertise with us
Contact us
About us

Copyright © 2025 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy | RSS