• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Motion Control Tips

Automation • Motion Control • Power Transmission

  • News
    • Industry News
    • Editor Blogs
    • Video
  • Controls
    • HMIs
    • PC-Based Controllers
    • PLCs + PACs
    • Stand-Alone Controllers
    • Software
  • Drives
    • Servo Drives
    • Stepper Drives
  • Encoders
    • Absolute Encoders
    • Incremental Encoders
    • Rotary Encoders
  • Mechanical
    • Bearings
    • Brakes + Clutches
    • Belt + chain
    • Couplings
    • Gears + Gearing
    • Lubrication
    • Shock + Vibration Mitigation
    • Springs + Rings + Seals
  • Linear
    • Actuators
    • Linear Motors
    • Linear Encoders
  • Motors
    • AC Motors
    • DC Motors
    • Brushless Motors
    • Gearmotors
    • Piezo Motors
    • Servo Motors
    • Stepper Motors
  • Systems
    • Conveyors + linear transport systems
    • Gantries + Stages
    • Rotary Tables
    • Grippers + End Effectors
    • Robotics
  • Networks
    • Connections + Sliprings
    • Fieldbuses
    • I/O
    • Sensors + Vision
  • FAQs
    • Motion Casebook
    • Motion Selection Guides
  • Suppliers
You are here: Home / Motors / Gearmotors / Bison Gear Adds 650 Series to Verdant Duty(TM) AC Gearmotors

Bison Gear Adds 650 Series to Verdant Duty(TM) AC Gearmotors

June 24, 2009 By Motion Control Tips Editor Leave a Comment

St. Charles, IL – Following the successful introduction of its 100 in-lb (11.3 N-m) inverter-duty AC gearmotor line, Bison Gear & Engineering Corp. has increased by seven times the output torque capability of its Verdant Duty™ 3-phase AC offering with the introduction of the new 650 Series variable speed gearmotors. Driven by 1/4 or 1/2 hp (186 or 373 W) three phase 230 volt TEFC AC electric motors, these specially constructed inverter-duty gearmotors are designed for long life variable frequency drive operation with continuous duty torque outputs from 148 to 717 in-lbs (16.7 to 81 N-m).

bison-verdant-2.jpg
The 650 Series Verdant Duty™ standard product offering is made up of five models with gear ratios from 27.6 to 214.5:1. Like all of Bison’s standard and Verdant Duty™ products, they are supported by Bison’s In-Stock, Instant-Ship (ISIS) program and available from Bison distributors and direct from the Bison website. Complete specifications and CAD drawings for these units are also available at Bison Gear’s new website.

Bison Gear & Engineering Corp.

www.BisonGear.com

Filed Under: Gearmotors, Gears + Gearing, Mechanical PT Tagged With: bison

Reader Interactions

Leave a Reply

You must be logged in to post a comment.

Primary Sidebar

POWER TRANSMISSION REFERENCE GUIDE

DESIGN GUIDE LIBRARY

“motion
Subscribe Today

RSS Featured White Papers

  • Specifying electric rodless actuators: Ten tips for maximizing actuator life and system performance
  • The truth about actuator life: Screw drive survival
  • Top Ten Tips: How to specify electric rod-style actuators for optimal performance, reliability and efficiency

Footer

Motion Control Tips

DESIGN WORLD NETWORK

Design World Online
The Robot Report
Coupling Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering.

MOTION CONTROL TIPS

Subscribe to our newsletter
Advertise with us
Contact us
About us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on YouTubeAdd us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy | RSS