JVL Industri Elektronik A/S, a Danish company, now represented in Ohio, USA, announces a new expansion, CANopen, module for their MAC, Integrated AC Servo motors. The CAN module offers control and setup, logic I/O for high speed start/stop, CANbus/CANopen DS 301 and CANopen DSP 402 and DeviceNet under development. The module can be delivered with […]
Archives for January 2009
High Power Linear Drive from Trust Automation
San Luis Obispo, CA – The TA333 High Power Linear Drive is the newest addition to the Trust Automation line of high performance drives. The TA333 drive features a true Class-AB linear amplifier with pure analog throughput at currents up to 25A. Highly configurable, the drive can be used with a brushless motor using external […]
New Quadrature Encoder Display from BEI
New Quadrature Encoder Display from BEI Posted using ShareThis
Bison Gear Releases Whitepaper on “Improving Gearmotor Efficiency”
St. Charles, IL – A new white paper on “Improving Gearmotor Efficiency” posted on the Bison Gear & Engineering Corp. web site addresses the relatively untapped energy savings to be had with the proper application of the billions of fractional horsepower electric motors and gearmotors in use today. Most electric motor efficiency efforts and attention […]
Electric Actuator EGC
Festo announces the addition of the Electric Actuator EGC to the family of electromechanical actuators. The EGC is designed for high dynamic speeds and high rigidity. This modular actuator can be used as an individual component adapted to third-party motors or as a complete system provided by one source – Festo. The EGC offers a […]
PLC-on-a-Card Can Master up to 64 Axes
One PLC-on-a-card can automate an entire machine. The new PLC can handle up to 64 axes for complex motion control applications, with curves calculated online, multi-axis interpolation, and kinematic transformation. Available in three different versions depending on the hardware requirements of different networks, MOVI-PLC can connect to EtherNet/IP, DeviceNet, ProfiNet, Profibus, EtherCAT, Modbus TCP/IP and […]
Applied Motion Adds CANopen Option to ST Step Motor Drives
WATSONVILLE, CA – Applied Motion Products announces the addition of CANopen communications to the ST series Step Motor Drives. The addition of a CANopen option card to the range of communication options allows the drives to be controlled by a CANopen master utilizing the DS301 and DSP402 communications protocols and the CAN 2.0b Passive physical […]
Parker Releases Low-Cost Connector Option
Parker’s Electromechanical Automation Division is pleased to announce release of a low-cost connector option. Historically, Parker has produced robust servo motor products for the general automation market. These motors could stand up to shock loads, environmental temperature cycles, moisture and more. All connectors and mating cables had large metal connector housings, which are meant for […]
Quick Clamping Shaft Collars from Ruland
Marlborough, Massachusetts — Ruland Manufacturing Company introduces its new quick clamping shaft collars. The new collars do not mar the shaft, do not require tools and are designed for quick adjustments. They are ideal for light duty applications with frequent setup changes or adjustments or where the need for tools is not practical. The quick […]
FlexTorq(TM) 762 Hollow Shaft Offset DC Gearmotors
St. Charles, IL – Designed to fit into high torque, tight space applications, and featuring either a 1.25″ (31.75 mm) I.D. hollow shaft or a 1.25″ diameter solid shaft in the u-shaped or s-shaped configuration, Bison Gear & Engineering Corp. introduces its new FlexTorq™ 762 series hollow shaft offset DC gearmotors. Driven by 1/20, 1/4 […]