The EDD-3701x EtherCAT slave drive (part of Galil’s EtherCAT Family of products) now communicates seamlessly with any TwinCAT EtherCAT master — as well as with Galil’s DMC-500×0 and DMC-52xx0 EtherCAT master drives.
The EDD-3701x drives have the ability to control either brushed or brushless servo motors, steppers, and microstepping motors. The EDD-3701x is also equipped with eight digital inputs, four digital outputs, two analog inputs, and two analog outputs. All I/O information from these drives are available to the EtherCAT master, reducing the need for separate EtherCAT I/O devices.
Galil’s powerful software package GDK simplifies the EDD-3701x setup. GDK’s step by step tool leaves no room for error. For more information, visit galil.com.
EDD-3701x EtherCAT slave drive specifications
|
Specification |
EDD-37012 | EDD-37016 | EDD-37017 |
|
Motor type |
Brushed or brushless |
2-phase stepper |
2-phase stepper or 2-phase brushless |
|
Drive type |
PWM | Stepper |
Micro-stepper or PWM |
|
Current |
10 A continuous • 15A peak | 1.4 A/Phase |
10A continuous • 15 A peak |
| Supply voltage | 20 to 80 Vdc | 12 to 30 Vdc |
20 to 80 Vdc |
Leave a Reply
You must be logged in to post a comment.