Torrance, Cal. – Nidec Copal (U.S.A.) Corporation of has expanded their 0.630-in. (16 mm) OD brush and brushless DC gear motor product lines with the next generation MG16B (brush) and LB16MG (brushless) metal planetary gear motor series. The new metal planetary gear train allows for higher torque providing greater durability and reliability with improved protection […]
Archives for October 2011
Allen-Bradley ControlLogix 5570 Series offer memory and speed
Rockwell Automation (www.rockwellautomation.com) has proudly released a range of programmable automation controllers (PACs) that offer manufacturers higher processing speed as it supports over 100 axes of motion. Seamlessly integrating through SERCOS and EtherNet/IP network interfaces, the Allen-Bradley Controllogix 5570 Series features optimized process, safety, motion and information capabilities. The new series does not only increase […]
Single-Axis Controller with 800W Sine Drive from Galil
Rocklin, Cal. – Galil Motion Control introduces the DMC-300xx Pocket Motion Controller Series, a single-axis Ethernet motion controller. It combines a high performance motion controller and a 800W sine drive in a low cost, compact 3.9-in. x 5.0-in. x 1.5-in. package. The DMC-300xx is also available as a controller-only model that can be connected to […]
NI unveils new motion and vision hardware with NI RIO technology
National Instruments (www.ni.com) has expanded its portfolio of NI reconfigurable I/O (RIO) technology with the addition of a motion module for CompactRIO and a reconfigurable Camera Link frame grabber. A PC-based embedded vision board, the NI PCIe-1473R frame grabber seamlessly combines Camera link interface with field-programmable gate array (FPGA) to allow engineers to easily create […]
Rockwell Automation introduces two new programmable logic controllers
Rockwell Automation (www.rockwellautomation.com) has announced the release of its two new Allen-Bradley controllers, the Micro830 and Micro810, as well as the Connected Components software. A part of the Allen-Bradley Micro800 range, the component-class micro programmable controllers provides machine manufactures a cost-effective control solution, making them suitable for standalone machine applications with less than 48 I/O. […]
Servo2Go Adds New DMC-1417 Econo PCI BUS Motion Controller from Galil
Greenville, Del. – Servo2Go.com has added Galil Motion Control’s new PCI BUS Econo Motion Controller, the DMC-1417, to its broad range of PCI-based motion controllers. The DMC-1417 can handle the most demanding applications with features such as an extra encoder input for electronic gearing, program memory with multitasking, uncommitted I/O and user-selectable stepper or servo […]
BEI’s HS52 explosion proof rotary encoder revealed
BEI Sensors (www.beisensors.com) has unveiled a space-saving and ultra rugged industrial encoder that meets the required standards and certifications for use in potentially explosive environments. Model HS52 is the industry’s first ATEX and UL rated explosion proof hollow shaft encoder. This rotary encoder can be operated directly in Zone 1 and Division 1 work environments […]
Mitsubishi offers Ethernet/IP connectivity in SD series robots
Mitsubishi Electric Automation Inc. (www.meau.com) made a headline when it unveiled its SD series robots with five degrees to six degrees of freedom. A handy group of machines, the RV-2A and RV-2AJ have been especially designed to help in moving as well as in placing components during production. Featuring various uses, the SD series robots […]
NET Concentrator System acts as single or dual MODBUS master
Moore Industries (www.miinet.com) has unveiled its updated NET Concentrator System® (NCS), which offers users with increased options for communications. The addition of the EMM Interface Module provides the process control as well as the distributed I/O network with dual, independent MODBUS RTU (RS-485) ports and Ethernet (MODBUS/TCP) port as standard. The MODBUS RTU ports can […]
Baldor enhances performance of Dodge tapered roller bearing
Baldor (www.baldor.com) has unveiled the latest Dodge Type E-Xtra tapered roller bearing, which comes with advanced sealing system and high load ratings. Since the launch of the first Dodge Type E bearings in 1938, the range has been continuously improved to meet the changing demands of industrial customers. This innovation is continued with the addition […]