• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Motion Control Tips

Automation • Motion Control • Power Transmission

  • News
    • Industry News
    • Editor Blogs
    • Video
  • Controls
    • HMIs
    • PC-Based Controllers
    • PLCs + PACs
    • Stand-Alone Controllers
    • Software
  • Drives
    • Servo Drives
    • Stepper Drives
  • Encoders
    • Absolute Encoders
    • Incremental Encoders
    • Rotary Encoders
  • Mechanical
    • Bearings
    • Brakes + Clutches
    • Belt + chain
    • Couplings
    • Gears + Gearing
    • Lubrication
    • Shock + Vibration Mitigation
    • Springs + Rings + Seals
  • Linear
    • Actuators
    • Linear Motors
    • Linear Encoders
  • Motors
    • AC Motors
    • DC Motors
    • Brushless Motors
    • Gearmotors
    • Piezo Motors
    • Servo Motors
    • Stepper Motors
  • Systems
    • Conveyors + linear transport systems
    • Gantries + Stages
    • Rotary Tables
    • Grippers + End Effectors
    • Robotics
  • Networks
    • Connections + Sliprings
    • Fieldbuses
    • I/O
    • Sensors + Vision
  • FAQs
    • Motion Casebook
    • Motion Selection Guides
  • Suppliers

Wago

Part 5: Motion control + MQTT, OPC-UA, and other protocols for cloud services

June 10, 2020 By Lisa Eitel Leave a Comment

In Part 4 of this series, we detailed edge computing and gateways for industrial machinery. Now consider the various protocols and communications leveraged in IIoT connectivity — for example, the SCADA, MES, and ERP architectures we already covered in Part 1 and 2 of this series. These are the most involved in IT/OT (operational technology) […]

Filed Under: Controls, Drives + Supplies, Featured, Industrial Automation, Networking + IoT Tagged With: Lenze, Wago

Part 4: Edge computing and gateways proliferate for industrial machinery

June 10, 2020 By Lisa Eitel Leave a Comment

Reconsider the actuators, sensors, and other edge devices covered in Part 1 and Part 2 and Part 3 of this series. Such components are fundamental to edge computing. Supported by gateways and controllers with dedicated connectivity functions, these components use their logic resources to process data before sending it onward to controls, the cloud, or […]

Filed Under: Controls, Featured, Industrial Automation, Integrated Motion Systems, Networking + IoT, PLCs + PACs Tagged With: appliedmotionproducts, boschrexroth, RegalBeloit, Wago, weintek

Part 1: Connectivity and IoT in motion and general automation

June 10, 2020 By Lisa Eitel Leave a Comment

In this six-part series, we explore how machine designs are evolving with wireless connectivity, Ethernet-based networking protocols, cloud-based operations, open programming, and various forms of edge computing. Links at the conclusion of each part follow in order, and here is a listing of all topics covered: Part 1 ⚙️ Connectivity and IoT in motion and […]

Filed Under: Controls, Featured, HMIs, Industrial Automation, Industry News, Integrated Motion Systems, Networking + IoT, PLCs + PACs, Software Tagged With: Festo, Lenze, Wago

Touch Panel 600 Line brings high quality to visual applications

June 13, 2019 By Paul Heney Leave a Comment

WAGO’s new line of Operator Interface devices, the Touch Panel 600 line, brings high-tech screens and high quality visualizations to allow users to accompany their machines with advanced features. The engine has a Cortex A9 multicore processor providing fast operating speeds. On board security include a built in firewall and VPN to help users address […]

Filed Under: HMIs Tagged With: Wago

WAGO SPEEDWAY IP67 Incremental Encoder

July 24, 2013 By Motion Control Tips Editor Leave a Comment

WAGO Corporation adds an HTL Incremental Encoder/Counter Module to its SPEEDWAY IP67 I/O-SYSTEM. The machine-mountable 767-5202 evaluates incremental encoders and SSI absolute encoders at 24 V signal levels in harsh environments. It also provides a counting function for binary signals up to 250 kHZ. This makes it ideal for counting motor revolutions in applications such […]

Filed Under: Encoders Tagged With: Wago

WAGO “ETHERNET 2.0” Controller comes with SD Card

June 28, 2011 By Motion Control Tips Editor Leave a Comment

Wago Corporation (www.wago.com) has announced that its 750-880 “ETHERNET 2.0” Programmable Fieldbus Controller now features one MB data memory as well as SD port for up to eight GB of additional memory. Aside from increasing the intelligence of industrial Ethernet applications, the 750-880 — which is the third from the “ETHERNET 2.0” platform of WAGO […]

Filed Under: Controls, Fieldbuses, Networking + IoT Tagged With: Ethernet, Wago

WAGO’s new Ethernet fieldbus controller platform

November 29, 2010 By Motion Control Tips Editor Leave a Comment

WAGO Corporation (www.wago.us) is now offering a new Ethernet fieldbus controller that can process 1,000 instructions in just 235 μS. Using the company’s second generation Ethernet platform, it also offers upgraded memory capacity for web applications and PLC programs, along with an embedded dual-port Ethernet switch. “We are both upgrading the processor and offering enhanced […]

Filed Under: Controls, Fieldbuses, Networking + IoT Tagged With: Ethernet, Fieldbus, Wago

High-Density, 16-Point I/O Modules from WAGO

September 9, 2009 By Miles Budimir Leave a Comment

Germantown, WI – Sixteen I/O points in one 12mm-wide module make WAGO’s 16-point I/O ribbon cable modules one of the most compact solutions for streamlining control-to-machine wiring. The DIN-rail mount modules feature 16 inputs (750-1400), 16 outputs (750-1500) or 8 inputs/8 outputs (750-1502) and an HE10 ribbon cable interface. With the flat ribbon cable, the […]

Filed Under: I/O Tagged With: Wago

Primary Sidebar

POWER TRANSMISSION REFERENCE GUIDE

DESIGN GUIDE LIBRARY

“motion
Subscribe Today

RSS Featured White Papers

  • Specifying electric rodless actuators: Ten tips for maximizing actuator life and system performance
  • The truth about actuator life: Screw drive survival
  • Top Ten Tips: How to specify electric rod-style actuators for optimal performance, reliability and efficiency

Footer

Motion Control Tips

DESIGN WORLD NETWORK

Design World Online
The Robot Report
Coupling Tips
Linear Motion Tips
Bearing Tips
Fastener Engineering.

MOTION CONTROL TIPS

Subscribe to our newsletter
Advertise with us
Contact us
About us
Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on YouTubeAdd us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy | RSS