Leadshine 2-phase digital micro-stepping drives with micro-stepping motor movement and anti-resonance for optimal torque, provide extra smooth motion, low motor heating and noise. These drives accept a wide range of input voltages (12 to 110 Vdc, 18 to 80 Vac) and provide over-voltage and overcurrent protection, motor auto-configuration on power up and Soft-start at power […]
Stepper Drives
What is a constant voltage drive for a stepper motor and when is it used?
There are two fundamental types of stepper motor drives: constant voltage drives, which supply a fixed voltage to the motor, and constant current drives, which manipulate voltage to ensure that a constant current is delivered to the motor. Stepper motor electrical basics The most fundamental equation governing the behavior of a stepper motor is Ohm’s law, […]
New harmonic gearing on 1.8° flat PKP series stepper motors from Oriental Motor
Oriental Motor now sells a new PKP Series stepper motor. The offering includes a 51-mm (2.0-in.) frame size harmonic gearhead for the 42-mm (1.65-in.) PKP Series 2-phase Flat Type motor. This new combination compliments the 60 mm (2.36 in.) PKP Series Flat Type which is available with a Harmonic gearhead or round shaft. Both frame […]
Six common mistakes to avoid when specifying and using step motors
The mistakes we outline here have been corrected countless times by thousands of step-motor users around the world. Avoid these mistakes with the presented solutions — and make your next application a successful one. By Eric Rice • National Marketing Director | Applied Motion Products Step motors offer the automation industry a cost-effective and simple […]
TRINAMIC TMC2209 stepper driver for silent desktop machines
TRINAMIC Motion Control GmbH & Co. KG now sells the TMC2209 stepper driver IC — a motor driver that enables silent operation, intelligent stall detection, and lower cost for 3D printers, office and home automation equipment, and other applications using two-phase stepper motors. The TMC2209 is pin-compatible with earlier TRINAMIC devices, as well as some […]
Galil’s EDD EtherCAT slave drives now offers TwinCAT Support
The EDD-3701x EtherCAT slave drive (part of Galil’s EtherCAT Family of products) now communicates seamlessly with any TwinCAT EtherCAT master — as well as with Galil’s DMC-500×0 and DMC-52xx0 EtherCAT master drives. The EDD-3701x drives have the ability to control either brushed or brushless servo motors, steppers, and microstepping motors. The EDD-3701x is also equipped […]
Koford Engineering 60-A 24-V digital sensorless motor drive
Koford Engineering now sells a new series of 60-A 24-V digital sensorless drives. These drives feature 99% efficiency, compact size, and high performance. They run motors to 80,000 rpm and can run two-pole motors. The design can run at 100% duty cycle compared to many other drives that are limited to 95% duty cycle. This […]
B&R X20-series stepper motor module to boost efficiency
The new X20SM1436-1 module from B&R is a new X20 module for direct control of stepper motors. The module runs stepper motors with operating voltages from 18 to 60 Vdc at currents to 2.5 A. Plus integrated current reduction function increases performance and reduces energy consumption. With the current reduction function, B&R has integrated sensorless […]
What is current decay (aka recirculating current) in a stepper drive?
A common type of stepper drive is the chopper drive, so named because it rapidly switches the output voltage from the drive on and off — “chopping” it — to provide constant current to the motor. Chopper drives use one H-bridge per motor phase to drive voltage to the motor windings. A sense resistor at […]
New stepper drives from Applied Motion Products
Applied Motion Products has introduced a new series of stepper drives that support a range of industrial Ethernet and Fieldbus network protocols including EtherCAT, EtherNet/IP, CANopen, Modbus, Ethernet and RS-485, as well as a proprietary Serial Command Language (SCL) for efficient network communications over Ethernet (UDP or TCP) and RS-485. By accepting high-level commands via […]
